Context : Vital pulp therapy has been known as one of the treatment options to preserve pulp after being exposed by trauma or caries. Aim : To investigate human pulpal response to white and grey mineral trioxide aggregate (WMTA, GMTA) and Dycal (MTA) as pulp capping agents. Setting and Design : Human volunteers were participated in this randomized clinical trial. Materials and Methods : This study was conducted on 90 intact first and second premolars of human maxillary and mandibular teeth. The teeth were randomly assigned into three groups of 30 each. Under local anesthesia, teeth were exposed and capped either with GMTA, WMTA, or Dycal. After 30, 60, and 90 days 10 teeth of each group were extracted and prepared for histologic observation. Statistical Analysis : Histopathologic data were analyzed by χ², Kruskal Wallis and Mann Whitney tests. Results : the calcified bridge in teeth that were capped with GMTA was significantly thicker than Dycal at 30 and 60 days (P= 0.015 and P=0.002, respectively); whereas WMTA showed significantly thicker calcified bridge than Dycal at 90 days (P=0.02). In addition, GMTA specimens showed significantly less inflammation compared to Dycal samples at 90 days interval (P=0.019). No significant difference was found between GMTA and WMTA in terms of calcified bridge thickness and pulp inflammatory response to the capping materials (P>0.05). Conclusions : Based on the result of this study, both types of MTA can be suggested as the materials of choice for direct pulp capping procedure instead of Dycal as hard setting calcium hydroxide cement.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : To aim of this study is to investigate the root canal characteristics of mandibular incisors in a North East Indian population using a canal staining and tooth-clearing technique. Materials and Methods : Four hundred and eighty extracted mandibular incisors, collected from dental clinics within North East India were selected for this study. Following pulp tissue removal, the teeth were decalcified with 5% nitric acid, dehydrated with ascending concentrations of alcohol and rendered clear by immersion in methyl salicylate. After staining of the canal systems with India ink, cleared teeth were examined under 5X magnification and the following features were evaluated: (i) number and type of root canals; (ii) presence and location of lateral canals and intercanal communications; (iii) location of apical foramina; and, (iv) Bifurcation of canals. Results : The majority of mandibular incisors had a single canal (63.75% of teeth possessed a Type I canal system). Although 36.25% of the roots possessed two canals, only 6.25% had two separate apical foramina. Conclusions : The prevalence of two canals in this group (of North East Indians) of mandibular incisors was 36.25% and is within the range of previous studies performed on populations of different racial origin.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim and Objectives : To evaluate the cervical marginal microleakage of class II packable composite resin restorations using flowable composite and resin modified glass ionomer as intermediate layers and whether the difference in the thickness of these intermediate layers would influence the microleakage. Materials and Methods : Standardized class II box only cavities (4 mm bucco lingual width 2 mm mesio distal depth with the gingival margin 1 mm above the cemento-enamel junction (CEJ) were restored as follows: Group A Restoration with packable composite alone, Group B, Subgroup 1, 1 mm flowable composite liner + packable composite, Sub Group 2, 2 mm flowable composite liner + packable composite, Group C, Subgroup 1, 1 mm resin modified glass ionomer cement (RMGIC) liner + packable composite, Sub Group 2, 2 mm RMGIC liner + packable composite, The specimens were thermocycled, stained with methylene blue, sectioned to evaluate the dye penetration. Data were analyzed using Kruskall Wallis Test and Mann Whitney U test. Results : There was no statistically significant difference between the groups. The difference in the thickness of the intermediate layers did not influence the microleakage. Conclusions : Use of 1 mm of flowable composite intermediate layer improved the sealing ability of packable composites than the differential thickness of resin modified glass ionomer.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

In comparison to the conventional apexification using calcium hydroxide, artificial apical barrier technique is more valuable and less time consuming. This article describes successful use of calcium-enriched mixture (CEM) cement as an artificial apical barrier in open apices. In this study, 13 single-rooted teeth with necrotic pulps and open apices were treated non-surgically. After copious irrigation of the root canals with NaOCl 5.25% and gentle filing, based on need for interappointment dressing, treatments were followed by CEM cement (BioniqueDent, Tehran, Iran) apical plug insertion in the first or second appointment. All cases were then permanently restored. All subjects were followed until radiographic evidence of periradicular healing was seen (mean 14.5 months). Clinically, all cases were functional and asymptomatic and complete osseous healing was observed in all the teeth. Considering the biological properties of CEM cement, this new endodontic biomaterial might be appropriate to be used as artificial apical barrier in the open apex teeth.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : The effect of different concentrations of hydrogel of sodium ascorbate on bond strength of bleached enamel for varying periods of time and the mode of failure was evaluated. Materials and Methods : Seventy enamel surfaces were obtained from 35 human extracted premolars. Specimens were divided into four groups: no bleaching (control), bleaching with carbamide peroxide gel, bleaching and application of 10% / 20% sodium ascorbate hydrogel for 30, 60, 120 min. Surfaces were bonded with a total etch bonding system and composite resin. Specimens were tested for shear bond strength. Mode of failure was determined by stereomicroscope. Data were analyzed using a two-way analysis of variance, and Scheffe's post hoc test. Results : Sodium ascorbate hydrogel application following bleaching increased the resin-enamel bond strength and was directly proportional to its duration of application. However, there was no difference in bond strength with an increase in the concentration of sodium ascorbate hydrogel. Conclusion : Immediate bonding of composite resin to bleached enamel is possible after treatment with antioxidant sodium ascorbate hydrogel.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Objectives : To evaluate and compare the clinical performance of Giomer (Beautifil II) and RMGIC (Fuji II LC) in noncarious cervical lesions. Materials and Methods : Thirty-two subjects with one or two pairs of noncarious cervical lesions were included in the study. Each pair of lesion was restored with either giomer or RMGIC assigned randomly. Clinical evaluation of restorations was done using USPHS criteria. Data was formulated in a predesigned format and subjected to statistical analysis using the chi square test. Results : Statistically significant difference was found between RMGIC and Giomer with respect to surface roughness with P value <0.001. Conclusion : Giomer showed superior surface finish compared to RMGIC. Both Giomer and RMGIC showed equal retention ability.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aims : This study evaluated the effect of 2% chlorhexidine cavity disinfectant on microleakage in class II cavities restored with light cured composites using a single bottle adhesive in an in vitro model. Materials and Methods : Proximal box cavities were prepared on mesial and distal surfaces of 40 non carious mandibular third molars, resulting in total of 80 cavities. Forty cavities on were rinsed with normal saline and 40 cavities were rinsed with 2% chlorhexidine cavity disinfectant. All cavities were restored with a single bottle adhesive and nano hybrid composite resin. Microleakage was evaluated at the gingival margin using methylene blue dye penetration method. Results and Conclusion : Chlorhexidine cavity disinfectants produced significantly higher microleakage while restoring the cavities using a self-etching single bottle adhesive.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : To compare the fracture resistance of teeth restored with fiber-reinforced composite (FRC) posts and experimental dentin posts milled from human root dentin. Materials and Methods : Thirty maxillary central incisors were divided into three groups of ten each. Twenty teeth were restored with FRC posts and solid dentin posts and numbered as Groups 2 and 3 respectively while Group 1 acted as the control, without any post. The teeth were loaded at 135° angle to their long axes after core build-up and the failure loads were recorded. Results : One-way Analysis of Variance (ANOVA) and Bonferroni multiple comparisons revealed a significant difference among test groups with the control group showing the highest fracture resistance, followed by the dentin post group and lastly the FRC post group. Conclusions : Teeth restored with dentin posts exhibited better fracture resistance than those restored with FRC posts.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : To determine the effect of fiber and its orientation on the fracture resistance of composite restorations in root-filled premolars. Materials and Methods : 50 sound human premolars were collected and assigned to five groups of ten specimens each. In group 1 (control), specimens were not root-filled. In the other four groups, MOD cavities were prepared and the cusps were reduced to 1.5 mm. In groups 2 and 3, the samples were filled with Z-250 and spectrum composites respectively without fiber reinforcement. Groups 4 and 5 were reinforced with Fiber-Ribbon-(Angelus) and restored with spectrum composite. Fibers were placed in the U-shaped design in group 4 while they were placed in the cross-shape in occlusal region in group 5. The fracture resistance was tested using a mechanical testing machine at crosshead speed of 1mm/min. Results : The fracture strength of control group was 1271.16±722.04 N while it was 952.05±330.16 N for group 2, 918.52±256.6 N for group 3, 857.13±184.58 N for group 4 and 1138.81±406.64 N for group 5. Fracture strength of group 5 was more than other groups except for group 1, there was no statistically significant differences. Conclusions : The reinforcement of composite with fiber does not increase fracture resistance of root-filled premolars significantly.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

In the era of minimal invasive dentistry, every effort should be directed to preserve the maximum tooth structure during cavity preparation. However, while making cavities, clinicians usually get indecisive at what point caries excavation should be stopped, so as to involve only the infected dentin. Apparent lack of valid clinical markers, difficulties with the use of caries detector dyes and chemo mechanical caries removal systems carve out a need for an improved system, which would be helpful to differentiate between the healthy and infected dentin during caries excavation. Light induced fluorescence evaluation is a novel concept implicated for caries detection and for making decisions while cavity preparation. This paper describes a few cases that explain the clinical applicability of this concept, using the SoproLife camera that works on this principle. Autofluorescence masking effect was found to be helpful for caries detection and the red fluorescence in the treatment mode was found helpful in deciding 'when to stop the excavation process.' Light induced fluorescence evaluation - Diagnosis - Treatment concept concept can be used as a guide for caries detection and excavation. It also facilitates decision making for stopping the caries excavation so as to involve infected dentin only.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : This study aims to evaluate the cytotoxicity of a new fast set highly viscous conventional glass ionomer cement (GIC) with L929 fibroblasts. Materials and Methods : The cement capsule was mixed and introduced into a paraffin wax mould. After setting, the cement was incubated in Dulbecco's Modified Eagle's Medium. Six replicates of the material extract were added to the culture medium in 96-well plates. L929 mouse fibroblast cells were added into the wells and then incubated for 48 h. Dimethylthiazol diphenyltetrazolium bromide test was performed for cytotoxicity evaluation. Results : The results showed that this GIC brand did not yield a half-maximal inhibitory concentration value, IC50, as the cell viability was above 50% at all concentrations. Cell viability over 90% was observed at the concentrations of 3.125 and 1.5625 mg/ml. Maximum concentration of the material showed cell viability of 59.4%. Conclusions : This new fast set highly viscous conventional GIC showed low cytotoxicity to mouse fibroblast cells, and it can be suggested as a substitute for dental cements exhibiting a long setting time.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

This clinical case report describes the diagnosis and treatment of an external invasive cervical resorption. A 17-year-old female patient had a confirmed diagnosis of invasive cervical resorption class 4 by cone beam computerized tomography. Although, there was no communication with the root canal, the invasive resorption process was extending into the cervical and middle third of the root. The treatment of the cervical resorption of the lateral incisor interrupted the resorptive process and restored the damaged root surface and the dental functions without any esthetic sequelae. Both the radiographic examination and computed tomography are imperative to reveal the extent of the defect in the differential diagnosis.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Advances in material sciences and technology have provided today's clinicians the strategies to transform the mechanistic approach of operative dentistry into a biologic philosophy. In the last three decades, composite resins have gone from being just an esthetically pleasing way of restoring Class III and Class IV cavities to become the universal material for both anterior and posterior situations as they closely mimic the natural esthetics while restoring the form of the human dentition. In order to enhance their success, clinicians have to rethink their protocol instead of applying the same restorative concepts and principles practiced with metallic restorations. Paralleling the evolution of posterior composite resin materials, cavity designs, restorative techniques and armamentarium have also developed rapidly to successfully employ composite resins in Class II situations. Most of the earlier problems with posterior composites such as poor wear resistance, polymerization shrinkage, postoperative sensitivity, predictable bonding to dentin, etc., have been overcome to a major extent. However, the clinically relevant aspect of achieving tight contacts in Class II situations has challenged clinicians the most. This paper reviews the evolution of techniques and recent developments in achieving predictable contacts with posterior composites. A Medline search was performed for articles on ''direct posterior composite contacts.'' The keywords used were ''contacts and contours of posterior composites.'' The reference list of each article was manually checked for additional articles of relevance.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Background : Before obturation, various endodontic solutions are used as a final rinse. These solutions might affect the bond strength of Resilon-Epiphany system. The aim of this study was to evaluate the effect of NaOCl (5.25%), chlorhexidine CHX (2%), EDTA solution (17%), and BioPure MTAD on push out bond strength of Resilon-Epiphany system. Materials and Methods : Seventy-five human premolar roots were prepared and divided on the basis of final endodontic solution rinse. The canals were obturated with Resilon-Epiphany system. All samples were restored using a fiber post system and indirect composite crown. The samples received 150 000 cycles of mechanical loading. Push out bond strength was performed in the apical third of root having Resilon obturation. Results and Conclusions : Different endodontic solutions tested, did not affected the push out bond strength of Resilon-Epiphany obturation system.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

This case report describes a technique used to treat smooth surface white spot lesions microinvasively. It is based on the infiltration of an initial enamel caries lesion with low-viscosity light-curing resins called infiltrants. The surface layer is eroded and desiccated, followed by resin infiltrant application. The resin penetrates into the lesion microporosities driven by capillary force and is hardened by light curing. Infiltrated lesions lose their whitish appearance and look similar to sound enamel. Additionally, the treatment prevents lesion progression. This technique might be an alternative to microabrasion and restorative treatment in treating of white spot lesions of esthetically relevant teeth.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim/Objective : To understand the importance of intensity of light in polymerizing light cured composites and its relation to color stability. Materials and Methods : Forty specimens of composite disc with 3mm diameter and 1.5 mm thick were divided into two groups of 20 samples each. Group1: Twenty samples were cured with a light curing unit of380mw/cm ² . Group2: Twenty samples cured with a light curing unit of 680mw/cm ² . These polymerized samples were immersed in methylene blue dye for 24hoursand later washed and immersed in absolute alcohol for 24 hours. The amount of color released into absolute alcohol was assessed by spectrophotometric and colorimetric analysis. Results : Results were analyzed for spectrophotometric and colorimetric values by using the Mann-Whitney test. The group cured with low intensity light stained more compared to the group cured with a normal intensity of light. Conclusions : Intensity of light plays a crucial role in staining of the polymerized light cured composite. The intensity of the curing unit has to be maintained in acceptable limits to achieve good clinical results.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Background : The aim of this retrospective study was to assess the survival rate and causes of failure of quartz fiber posts used to restore endodontically treated teeth. Materials and Methods : Thirty-eight patients with endodontically treated premolar and anterior teeth that were then restored with a coronoradicular quartz fiber post and extensive composite resin restorations were selected for participation in the study. The age of the restorations ranged from 1 to 6 years. Survival probabilities of the restorations as well as causes of failures were analyzed using the Kaplan-Meier analysis and the Logistic regression (α = 0.05). Results : The overall cumulative survival rate (48.8%) was determined, while the survival probabilities after 1, 2, 4, 5, and 6 years of service were 88.37%, 60.95%, 45.71%, 32.65%, and 0%, respectively. Conclusions : The survival probability of endodontically treated teeth restored with a quartz fiber post and composite restorations is associated with the dental arch.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aims : This study was undertaken to determine the effect of step-curing, ramp curing, single intensity on the effectiveness of cure and polymerization shrinkage of composite resin. The influence of filler loading on the effectiveness of cure and polymerization shrinkage of composite resin was investigated. Materials and Methods : In this study, a total of 80 specimens divided into four groups were used. Group I - specimens cured with the step-cure mode. Group II - specimens cured with single high intensity. Group III - specimens cured with the ramp-cure mode. Group IV - specimens cured with single low intensity. Each group had two subgroups based on the composite resins used for making the specimen. The effectiveness of cure was determined from surface hardness values obtained from Rockwell hardness testing. A mathematical volumetric method was used to assess the volumetric shrinkage. Results : Group III showed the best effectiveness of cure followed by group I and II. Group IV showed the least. Polymerization shrinkage was highest with group III and group II, were as was lowest for group I and IV. Charisma showed better effectiveness of cure and low polymerization shrinkage compared to Durafill VS. Conclusion : This study emphasizes on the fact that, the soft-start polymerization modes (step curing and ramp curing) should be preferentially used over the conventional single (high or low light) intensities to cure composite resins, as its use results in optimal properties.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

The present case describes root canal treatment in a maxillary first molar with unusual anatomy. A male patient was referred for the treatment of maxillary left first molar tooth. Clinical examination of the pulpal floor revealed 3 orifices in the mesio buccal root. The tooth was treated successfully. Anatomic variations must be taken into consideration in clinical and radiographic evaluation during endodontic treatment

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Objective : This study aimed to evaluate the ability of an optical spectroscopic sensor (OSS) to monitor bacterial-mediated acidogenic-profile of saliva resulting from bacteria-sucrose interaction. Materials and Methods : Stage-1, characterization experiments were conducted to standardize the OSS. Stage-2 clinical experiments were carried out on stimulated saliva samples from 70 children of age-group 1-12 years. The bacterial-mediated acidogenic-profile of saliva mixed with sucrose was monitored using the OSS for 180 minutes. Results : The clinical patients were categorized based on the dmfs score as caries-active, caries-inactive and caries-free. The bacterial-mediated acidogenic-profile measured in terms of t1/2 monitored using the OSS was significantly different between the caries-free and caries-active (P<0.05); and caries-free and caries-inactive groups (P<0.005). Conclusions : The significant correlation of the acidogenic-profile determined using the OSS and the caries-status highlighted the OSS as a sensitive and rapid chairside tool for the quantification of the acidogenic-profile of saliva that could help in monitoring the caries-risk in children.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Background : Porcelain from prosthesis such as crown or bridge can be fractured if exposed to trauma; and, can be repaired at chairside using composite resin. Aim : To investigate the fracture resistance of few techniques of surface preparation in repairing fractured porcelain using composite resin. Materials and Methods : Eighty samples of porcelain blocks were divided into 4 groups for different surface preparations, such as, Cimara repairing kit; porcelain etch kit containing hydrofluoric acid; Panavia F resin cement; and, sandblasting using aluminium oxide, before composite resin (Filtek Z250, 3M ESPE) was bonded to the prepared porcelain blocks. Twenty others samples in the control group comprised of pure porcelain blocks. The fracture resistance of each sample was tested using Instron machine (UK). Results : With the exception of the group repaired using hydrofluoric acid (3.04±1.04 Mpa), all the other groups showed significant difference in the fracture resistance values when compared to the control group (3.05 ± 1.42 MPa) at P<0.05. Conclusions : Etching of the porcelain blocks with hydrofluoric acid holds promise in the repair of fractured porcelain with composite resin at chairside.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]

Aim : In this study, we evaluated the effect of photopolymerization on Vickers microhardness of dual-polymerized resin cement at three locations when a translucent quartz fiber post was used. Materials and Methods : Single-rooted bovine teeth received quartz fiber post systems (length: 12 mm) using a dual-polymerized resin cement. In Group 1, the posts were cemented but not photopolymerized, and in Group 2, the posts were both cemented and photopolymerized. After cementation, approximately 1.5-mm thick sections were obtained (two cervical, two middle, and two apical) for regional microhardness evaluations. Statistical Analysis : Statistical analyses were performed using the SPSS software (ver. 11.0 for Windows; SPSS, Inc., Chicago, IL, USA). Microhardness (kg/mm ² ) data were submitted to two-way analysis of variance (two-way ANOVA) and repeated measures with microhardness values as the dependent variable and polymerization status (two levels: with and without) and root region (three levels: cervical, middle, and apical) as independent variables. Multiple comparisons were made using Dunnett's T3 post-hoc test. P values of <0.05 were considered to indicate statistical significance in all tests. Results : Photopolymerization did not significantly change the microhardness values when compared with no photopolymerization. Microhardness values also showed no significant difference between the three regions in the root canals in both groups. Conclusions : The mode of polymerization of the cement tested in combination with the translucent quartz fiber post system did not affect the microhardness of the cement at the cervical, middle, or apical regions of the root.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Aim : The aim was to evaluate the influence of water storage on fiber post-resin composite adhesion after different postsurface treatments. Materials and Methods : Forty-two fiber posts were used. Half of them were treated by hydrogen-peroxide and the other half were sandblasted. The adhesive (Single Bond, 3M, USA) was applied on the post. Core was built-up using flowable composite (Ζlite Flow, Bisco, USA). The specimens were divided into eight groups. Group 1 was treated with H ₂ O ₂ . Groups 2-4 were treated with H2O2 but stored for 3, 6, and 9 months, respectively. Groups 5-8 were sandblasted and stored for 0, 3, 6, and 9 months. μTBS was measured and data analyzed using one-way ANOVA and Tukey HSD. The fractured surfaces were evaluated by a stereomicroscope. The morphology of interfaces was assessed under SEM. H ₂ O ₂ -treated groups showed higher bond-strength. Results : The effect of "surface-treatment method" and "storage-time" was significant (P<0.0001), but there was no significant difference for their interaction effect (P=0.05). Water aging significantly decreased μTBS. Conclusions : Water aging significantly decreased microtensile bond strength regardless of the type of post surface treatment.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Background : Dental amalgam is the primary direct posterior restorative material used worldwide, but it have certain shortcomings due to the lack of adhesiveness to the cavity. The introduction of the concept of "bonded amalgam" helped improve the use of amalgam as a restorative material. Aim : Evaluation of the comparative push-out shear bond strength of four types of conventional glass ionomers used to bond amalgam to tooth in simulated class I situations. Materials and Methods : Four chemical cure glass ionomers are used: GC Fuji I, GC Fuji II, GC Fuji III and GC Fuji VII, and are compared with unbonded amalgam. The push-out bond strength was tested using the Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. Statistical Analysis : One-way ANOVA and post hoc Bonferroni tests were used to analyze the data. Results : The results showed that the use of glass ionomer to bond amalgam resulted in an increase in the bond strength of amalgam. The Type VII glass ionomer showed the highest bond strength in comparison with the other glass ionomers. Conclusions : Conventional glass ionomer bonds to amalgam and shows a beneficial increase in the bond strength of the restoration in comparison with unbonded amalgam.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

Facial trauma resulting in tooth avulsion results in problems of physical and emotional nature for the patient and a challenge for the dentist. Avulsion accounts for 0.5-16% of traumatic injuries in the permanent dentition that can occur at any age and is most common in the young permanent dentition. As an emergency procedure, it is advisable to replant a traumatically avulsed tooth, but unfortunately long-term success is rather low. After unsuccessful replantation and subsequent extraction, it is prudent to replace the lost tooth to avoid aesthetic, masticatory, and psychological difficulties and also to prevent arch length discrepancy with various alternatives are available for the same. We presented a method for management of one of the two replanted teeth that showed failure, using the natural crown as pontic in a fixed semi-permanent bridge until a more definitive prosthesis can be fabricated at a later age for better patient compliance.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub] [CITATIONS]  [PubMed]

With the increasing number of reports of aberrant root canal morphology, the clinician needs to be aware of the variable anatomy. Various case reports have been published with the finding of middle mesial canal in mandibular first molar, however finding of middle distal canal in distal root of mandibular first molar is rare. This case report describes root canal treatment of two rooted mandibular first molar with five root canals (three in distal and two in mesial root), and Sert and Bayirli Type XVIII canal configuration in distal root.

[ABSTRACT]  [FULL TEXT]  [PDF]  [Mobile Full text]  [EPub]  [PubMed]

[FULL TEXT]  [PDF]  [Mobile Full text]  [EPub]  [PubMed]