| This article has been cited by |
| 1 | Effect of four different finishing and polishing systems on resin composites: roughness surface and gloss retention evaluations | |
| Vincenzo Tosco,Riccardo Monterubbianesi,Giulia Orilisi,Maurizio Procaccini,Simone Grandini,Angelo Putignano,Giovanna Orsini |
| Minerva Stomatologica.2020;69(4) |
| [DOI] |
|
| 2 | Effect of vital bleaching on surface roughness and microhardness of nanofilled and nanohybrid composite resins | |
| Anindita Chakraborty,Tina Purayil,Kishore Ginjupalli,Kalyana-Chakravarthy Pentapati,Neetha Shenoy |
| F1000Research.2023;12(4)129 |
| [DOI] |
|
| 3 | The Effect of Finishing and Polishing Sequences on The Surface Roughness of Three Different Nanocomposites and Composite/Enamel and Composite/Cementum Interfaces | |
| Ksenia Babina,Maria Polyakova,Inna Sokhova,Vladlena Doroshina,Marianna Arakelyan,Nina Novozhilova |
| Nanomaterials.2020;10(7)1339 |
| [DOI] |
|
| 4 | Investigation of surface roughness values of various restorative materials after brushing with blue covarine containing whitening toothpaste by two different methods:
AFM
and profilometer | |
| Cemile Yilmaz,Özgür Kanik |
| Microscopy Research and Technique.2022;85(2)521 |
| [DOI] |
|
| 5 | Investigation of surface roughness values of various restorative materials after brushing with blue covarine containing whitening toothpaste by two different methods:
AFM
and profilometer | |
| Murali Mohan Bommana,Bharat Kirthivasan,Simerdeep Singh Gupta,Abhijat Shikhar,Amit Shah |
| Microscopy Research and Technique.2019;85(2)23 |
| [DOI] |
|
| 6 | Effect of additional polishing methods on the physical surface properties of different nanocomposites: SEM and AFM study | |
| Giovanna de Fátima Alves da Costa,Ana Carla Bezerra de Carvalho Justo Fernandes,Lenise Anand de Oliveira Carvalho,Aldenora Cardoso de Andrade,Isauremi Vieira de Assunção,Boniek Castillo Dutra Borges |
| Microscopy Research and Technique.2018;81(12)1467 |
| [DOI] |
|
| 7 | Bacterial Adhesion of Streptococcus mutans to Dental Material Surfaces | |
| Mirjam Kozmos,Petra Virant,Franc Rojko,Anže Abram,Rebeka Rudolf,Peter Raspor,Anamarija Zore,Klemen Bohinc |
| Molecules.2021;26(4)1152 |
| [DOI] |
|
| 8 | Comparison of the effect of sodium bicarbonate and glycine air polishing systems on tooth surface roughness: An atomic force microscopic analysis | |
| S. Tamilselvi,Raghavendra Reddy Nagate,Manae Musa Musleh Al-Ahmari,G. Kokila,Shreyas Tikare,Saurabh Chaturvedi |
| Technology and Health Care.2021;29(3)489 |
| [DOI] |
|
| 9 | Characteristics of low polymerization shrinkage flowable resin composites in newly-developed cavity base materials for bulk filling technique | |
| Keiko NITTA,Rie NOMOTO,Yuji TSUBOTA,Masuji TSUCHIKAWA,Tohru HAYAKAWA |
| Dental Materials Journal.2017;36(6)740 |
| [DOI] |
|
| 10 | The Substantiation of the Pre-Polymerization Heating Efficiency of the Dental Nanocomposite Material | |
| Zurab Khabadze,Alena Kulikova,Saida Abdulkerimova,Yusup Bakaev,Yunus Bakaev,David Todua,Oleg Mordanov,Anzhela Adzhieva,Georgy Davreshyan,Shamil Solimanov,Shamil Nazhmudinov |
| Pesquisa Brasileira em Odontopediatria e Clínica Integrada.2020;20(6)740 |
| [DOI] |
|
| 11 | The Effect of Various Polishing Systems on the Surface Roughness of Two Resin Composites—An In Vitro Study | |
| Marta Ewa Szczepaniak,Michal Krasowski,Elzbieta Boltacz-Rzepkowska |
| Coatings.2022;12(7)916 |
| [DOI] |
|
| 12 | Comparative Evaluation of Surface Roughness of different Composites and its effect on Colour Stability of the Restoration | |
| Nalini B,Srinivas Kumar Ch,Narsimha Rao VV |
| Research Journal of Pharmacy and Technology.2022;12(7)3854 |
| [DOI] |
|
| 13 | Characterization of spatial patterns of dental restorative nanocomposites | |
| Stefan Talu,Sebastian Stach,Tijana Lainovic,Larisa Blažic |
| Microscopy Research and Technique.2019;82(7)1215 |
| [DOI] |
|
| 14 | The effect of contemporary finishing and polishing systems on the surface roughness of bulk fill resin composite and nanocomposites | |
| Seda Gömleksiz,Oguzhan Gömleksiz |
| Journal of Esthetic and Restorative Dentistry.2022;34(6)915 |
| [DOI] |
|
| 15 | The Effect of Ultrasonic Scaling and Air-Powder Polishing on the Roughness of the Enamel, Three Different Nanocomposites, and Composite/Enamel and Composite/Cementum Interfaces | |
| Ksenia Babina,Maria Polyakova,Inna Sokhova,Vladlena Doroshina,Marianna Arakelyan,Alexandr Zaytsev,Nina Novozhilova |
| Nanomaterials.2021;11(11)3072 |
| [DOI] |
|
| 16 | Surface Roughness and Microbial Adhesion After Finishing of Alkasite Restorative Material | |
| Choa Park,Howon Park,Juhyun Lee,Hyunwoo Seo,Siyoung Lee |
| THE JOURNAL OF THE KOREAN ACADEMY OF PEDTATRIC DENTISTRY.2020;47(2)188 |
| [DOI] |
|
| 17 | Comparison of physical and mechanical properties of three different restorative materials in primary teeth: an in vitro study | |
| B. Keskus,F. Oznurhan |
| European Archives of Paediatric Dentistry.2022;23(5)821 |
| [DOI] |
|
| 18 | Evaluation of Efficiency of Polymerization, Surface Roughness, Porosity and Adaptation of Flowable and Sculptable Bulk Fill Composite Resins | |
| Elizabeta Gjorgievska,Daniel S. Oh,Daewon Haam,Dragana Gabric,Nichola J. Coleman |
| Molecules.2021;26(17)5202 |
| [DOI] |
|
| 19 | Development and maintenance of surface gloss of dental composites after polishing and brushing: Review of the literature | |
| Silvia P. Amaya-Pajares,Kiyono Koi,Hidehiko Watanabe,Juliana B. Costa,Jack L. Ferracane |
| Journal of Esthetic and Restorative Dentistry.2022;34(1)15 |
| [DOI] |
|
| 20 | Evaluation of the effects of additives on the properties of starch-based bioplastic film | |
| Olugbenga O. Oluwasina,Bolaji P. Akinyele,Sunday J. Olusegun,Olayinka O. Oluwasina,Nelcy D. S. Mohallem |
| SN Applied Sciences.2021;3(4)15 |
| [DOI] |
|
| 21 | A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties | |
| Izabela Maria Barszczewska-Rybarek |
| Materials.2019;12(24)4057 |
| [DOI] |
|
| 22 | Effect of Finishing and Polishing on The Surface Roughness of Bulk Fill Composites | |
| Abdullah Aljamhan,Syed Rashid Habib,Mohammed A. AlSarhan,Bashayer AlZahrani,Hessa AlOtaibi,Norah AlSunaidi |
| The Open Dentistry Journal.2021;15(1)25 |
| [DOI] |
|
| 23 | Surface Roughness of Nanohybrid Composites with Different Monomers after Finishing and Polishing with Different Polishing Systems | |
| Youssef Alaa Soliman,ELsayed Moustafa Mahmoud,Mohammed A. Gepreel,Rania Reda Afifi |
| Key Engineering Materials.2020;835(1)41 |
| [DOI] |
|
| 24 | Effect of CAD/CAM Bur Deterioration on the Surface Roughness of Ceramic Crowns | |
| Khaled Q. Al Hamad,Firas A. Al Quran,Sawsan Z. Jwaied,Ziad N Al-Dwairi,Bashar A. Al-Rashdan,Nadim Z. Baba |
| Journal of Prosthodontics.2022;31(4)320 |
| [DOI] |
|
| 25 | Translucency and Color Stability of a Simplified Shade Nanohybrid Composite after Ultrasonic Scaling and Air-Powder Polishing | |
| Ksenia Babina,Maria Polyakova,Inna Sokhova,Vladlena Doroshina,Alexandr Zaytsev,Elena E. Nikonova,Gleb S. Budylin,Evgeny A. Shirshin,Christian Tantardini,Nina Novozhilova |
| Nanomaterials.2022;12(24)4465 |
| [DOI] |
|
| 26 | Recent advances in hybrid measurement methods based on atomic force microscopy and surface sensitive measurement techniques | |
| Stephan Handschuh-Wang,Tao Wang,Xuechang Zhou |
| RSC Adv..2017;7(75)47464 |
| [DOI] |
|
| 27 | Designing kaolin-reinforced bionanocomposites of poly(vinyl alcohol)/gelatin and study of their mechanical and water vapor transmission behavior | |
| Manjulata Shrungi,Anjana Goswami,Jaya Bajpai,A. K. Bajpai |
| Polymer Bulletin.2019;76(11)5791 |
| [DOI] |
|
| 28 | Influences of Successive Exposure to Bleaching and Fluoride Preparations on the Surface Hardness and Roughness of the Aged Resin Composite Restoratives | |
| Khalid M. Abdelaziz,Shugufta Mir,Shafait Ullah Khateeb,Suheel M. Baba,Saud S. Alshahrani,Eman A. Alshahrani,Zahra A. Alsafi |
| Medicina.2020;56(9)476 |
| [DOI] |
|
| 29 | Effects of Silica Nanoparticles and Silica-Zirconia Nanoclusters on Tribological Properties of Dental Resin Composites | |
| Henry A. Rodríguez,Herley Casanova |
| Journal of Nanotechnology.2018;2018(9)1 |
| [DOI] |
|
